, o ne. 20 stern ave. springfield, new jersey 07081 u.s.a. telephone: (973) 376-2922 (212)227-6005 fax: (973) 376-8960 bi-directional tried* thy ristor power pac triacs 6a to isa rms up to 600 volts isolated and non-isolated tab features: power-glas? passivated silicon chip for maximum reliability. very low off-state (leakage) current at room and elevated temperatures. inherent immunity from non-repetitive transient voltage damage (max. critical rate-of-rise of on-state current subsequent to voltage breakover triggering, di/dt = 10 a/jusec.). low on-state voltage at high current levels. excellent surge current capability. 1600 volts rms surge isolation voltage on isolated triacs. selected types available from factory for use where circuit requires operation: ? with popular zero voltage triggering ic's - at 400 hz ? with low gate trigger current ? at higher voltage levels ? at higher commutating dv/dt levels isolated tab sc140 SC142 sc147 non- isolatedtab sc141 sc143 sc146 sc149 sc151 power pac package ? meets jedec to-220ab specifications. ? round leads ? greatly simplifies assembly. ? six standard lead forming configurations available from factory (including to-66 compatibility.) rugged, industry-proven packaging. tab coin molded silicone encapsulation power glas pallet plastic lock 3 at* isolated (red) non-isolated (blue) pictorial assembly quality semi-conductors
isolated tab sc140, 2. 7 non-isolated tab sc141, 3. 6, 9, sc151 maximum allowable ratings type rms on-state current, 't(rms)(1) amperes repetitive peak off-state voltage. vdrm(2) b volts 0 volts isolated tab sc140 sci 42 sci 47 6.5 8 10 200 200 1 200 400 400 400 non-isolated tab sc141 sci 43 sci 46 sci 49 sci 51 6 8 10 12 15 200 200 200 200 200 400 400 400 400 400 e volts m volts peak one full cycle surge (non-rep) on-state current, itsm amperes 50 hz amperes 60 hz amperes 500 500 500 600 600 600 74 104 104 80 110 110 i2t for fusing for times at(3) (rms ampere)2 seconds 1.0 millisecond (rms ampere)2 seconds, 8.3 milliseconds 18 20 20 26.5 50 so 500 500 500 500 500 600 600 i 600 600 600 74 110 110 110 110 80 120 120 120 120 18 20 20 20 20 26.5 60 60 60 60 peak gate power dissipation, pgm (4) 10 watts for 10 microseconds (see chart 4) average gate power dissipation, pg(av) 0.5 watts peak gate current, igm (4) see chart 4 peak gate voltage, vgm (4) see chart 4 storage temperature, tstg -40c to +125c operating temperature, tj -40 c to +100 c surge isolation voltage (5) 160 volts main terminal 02 off state t 1 e ~-\v mt2- 7 3?o quadrant / 1 >n -state isolated tab sc140, 2, 7 non-isolated tab sc141, 3, 6, 9, sc151 characteristics test repetitive peak off- state current peak on-state voltage sci 40 sci 41 sci 42 sc143 sci 46 sci 47 sc149 sc151 critical rate-of-rise of off-state voltage (higher values may cause device switching) sc140, sc141 SC142, sc143 sc146.sc147 sci 49 sci 51 critical rate-of-rise of commutating off-state voltage (commutating dv/dt) dc gate trigger current dc gate trigger voltage dc gate non-trigger voltage symbol idrm vtm dv/dt dv/dt(c) igt vgt vgd win. _ - - - - - - - - - 30 50 100 100 100 4 _ - - - - - - - - - - - 0.2 typ. _ - - - - - - - - - 100 150 150 200 250 - - - - - _ ? - - _ - - max. 0.1 0.5 1.85 .83 .75 .55 .65 .50 .65 1.52 _ ? __ ? - 50 50 50 80 80 80 2.5 2.5 2.5 3.5 3.5 3.5 units ma volts volts//nsec volts/aisec madc vdc vdc test conditions vdrm = maximum allowable repeti- tive off-state voltage rating gate open circuited tc = +25c tc = +100c tc = +25c, itm = 1 msec., wide pulse, duty cycle < 2% itm = 9.2 a peak itm = 8.5 a peak itm = 11.5 a peak itm = 11.5 a peak itm = 1 4 a peak itm = 14 a peak itm = 17 a peak itm = 21 a peak tc = +100c, rated vdrm gate open circuited exponential voltage waveform it(rms) = rated maximum allow- able rms on-state current, vdrm = maximum rated peak off-state voltage, gate open circuited. vd = 12 vdc trigger mode mt2+ gate + mt2- gate - mt2+ gate - mt2+ gate + mt2- gate - mt2+ gate - rl 100 ohms 100 ohms 50 ohms 50 ohms 50 ohms 25 ohms tc +25c -40c vd = 12 vdc trigger mode mt2+ gate + mt2- gate - mt2+ gate - mt2+ gate + mt2- gate - mt2+ gate - trigger mode mt2+ gate + mt2- gate - mt2+ gate - mt2- gate + rl 100 ohms 100 ohms 50 ohms 50 ohms 50 ohms 25 ohms rl 1000 ohms tc +25c -40c tc +100c ref. note 1 1 1 1,4 2 2 2,3
|
